1. Name: 16mm universal fire safety rope.
2, use: used for firefighters to save themselves and escape from the fire and rescue.
3. Structure:
(1) The universal fire safety rope is 16mm in diameter and 100m in length. The inner and outer double-layer braided structure is uniform in thickness and consistent in structure. The main load-bearing part is made of continuous fibers. The two ends of the rope are properly closed, and the rope loop structure can be connected with the safety hook. It is sewed with a thin rope of the same material for 50mm, and the seam is heat sealed. The seam is wrapped with a tightly wrapped plastic sleeve, and the end of the rope is marked with permanent labels by heat sealing. The contents of the permanent label are as follows: product name, specification and model, implementation standard, production date, contact information, manufacturer, etc., and installed in a position that is not easy to fall off and rub.
(2) Both ends of the universal fire safety rope are equipped with a self-locking safety hook.
(3) There is a professional portable rope storage package, and there is a two-dimensional code integrating product information inside the upper zipper, including cloud data such as product technical parameters, maintenance precautions, inspection report, implementation standard, manufacturer’s name, address and after-sales service contact information, which is convenient for users to scan, download and use.
4. Performance parameters:
(1) The universal fire safety rope meets the standard of XF494-2004 Anti-falling Equipment for Fire Fighting;
(2) The minimum breaking strength is 47.61kN；; When the load reaches 10% of the minimum breaking strength, the elongation of the safety rope is 4%. After the high temperature resistance test at 204 5 degrees Celsius, the rope has no melting and coking phenomenon, and is made of polyester.
5, operation and use
The universal fire safety rope is pulled out of the bag, and the surface of the rope body is checked for no damage. It can be used together with other equipment, and can be positioned for work after being tightened or suspended on the rope to enter or leave the work area. It can be used in conjunction with other mechanical devices, such as lowering and stopping devices or other adjustment equipment, and a figure-eight knot is used for connection. The connection point should be tied at any point of the rope with a figure-of-eight knot, and the rope head at the node should extend at least 10 cm.
Post time: Apr-28-2023